Inquiry Details


Submission Information
Tracking #: 16329
Date Submitted: 05/18/2020
Status: Resolved (No IP Change)
Inquiry Resolution

Estimated Release Date: Closed Proposed Resolution: MOTOR stated: After review of OEM service information and MOTOR Crash Estimating Data, the minimum estimated work time for labor procedures developed by MOTOR is 0.1 hrs, or six minutes. After review, we have determined that the estimated time to R&I/R&R each Floor Mat or Side Cover is less than six minutes. Please note: Estimated Work Times published by MOTOR are compiled from several independent sources and internal processes. Those elements are then combined by the MOTOR Database Development staff and extrapolated to produce MOTOR Estimated Work Times. Each MOTOR Estimated Work Time is the product of numerous sources. Source elements relied upon are: OEM Service Manual procedures and processes, Operation Observance, OEM Warranty Times, MOTOR Historical Database Analysis, User Input, Technician Operation Familiarity Analysis, Operation Procedure Step Analysis, and Vehicle Component Configuration Analysis. Development of MOTOR Estimated Work Times requires judgments to be made by a MOTOR Database Development Staff Member while evaluating each information source and internal process. The degree to which each source element impacts the ultimate crash data varies from operation to operation as the data is normalized across the universe of the MOTOR Database. Operation times published by MOTOR are based on new undamaged parts installed on new undamaged vehicles only. Time has not been considered for rust, corrosion, collision- related damage or repairs, aftermarket parts, etc. MOTOR’s labor time development techniques and breakdowns are considered proprietary information and are not distributed externally.

Vehicle Information
Year: 2019
Make: Subaru
Model: Forester
Body:
Database Inquiry

Inquiry Type: Parts

Database: CCC

Area of Vehicle: Rear Body And Floor

Part Name: Interior floor parts & trim

Part Description: spacer, carpet, jack, filler panel and all other related parts

OEM Part Number:

Issue Summary: None of these parts has a labor time to R&I or replace them.

Suggested Action: Put at least .1 in labor to replace them. If the carpet is going to be replaced it takes TIME for someone to remove the old one and install the new one. Nothing in the database should have a blank or zero for a labor time. Included should be the only operation has NO labor time EVERYTHING else needs a labor time.

Edit Inquiry Fields

Vehicle


*
*
*
*

Contact Information


*
*
*

Database Inquiry


If applicable
hours minutes
hours minutes
square inches
hours minutes

Attachments


Resolution Date