Inquiry Details


Submission Information
Tracking #: 16345
Date Submitted: 05/21/2020
Status: Resolved (No IP Change)
Inquiry Resolution

Estimated Release Date: Closed Proposed Resolution: MOTOR stated: After review of the concern, the estimated work time applied to R&I Engine/Trans includes all necessary disconnections and connections as stated in the OEM service procedure. Additional DEG Note: https://deg-heroku-18.herokuapp.com/inquiries/16131 Estimated Release Date: Closed Proposed Resolution: MOTOR stated: After review of the MOTOR data, the estimated work time applied to a Lift Gate includes time to disconnect and reconnect the Internal Wiring. • Please note; if the Lift Gate has internal wiring standard, it is considered an included item with R&R Lift Gate. This is also true for the Doors/Trunk/Hatch/Tail Gate/Hood/Bumper etc. • If the component/assembly has a “Pigtail Wiring Harness” that is contained in the component/assembly and disconnects from the “Body” (Body Wiring Harness) it is included with the component/assembly labor time. • If the component/assembly has a wiring harness that extends into the Vehicle’s Body without a disconnect point (wiring is part of Body Wiring Harness), D&R from the component/assembly is included, however the balance that remains in the Body is not included. • Replacement times for Body Wiring Harness or Engine Wiring Harness are not developed by MOTOR Information Systems as they are usually repaired instead of fully replaced. In the event that the Body Wiring Harness or Engine Wiring Harness must be completely replaced, an “on the spot evaluation” must be employed to determine the degree of access and the replacement time must be negotiated between estimators.

Vehicle Information
Year: 2017
Make: Nissan
Model: Altima SL
Body: Sedan
Database Inquiry

Inquiry Type: Procedure Page Issue

Database: CCC

Area of Vehicle: Engine / Transaxle

Page #:

Issue Summary: When remove and install of the motor for weld applications, it is necessary to unplug many connectors and label them. Within the labor time premise, or H-Notes. There is no mention of the extra time it takes to unplug the many connectors needed at the firewall and radiator support.

Suggested Action: ADvise if this is an on the spot evaluation or Included in the labor time. If INC please post it to the P-Pages or H-Notes.

Edit Inquiry Fields

Vehicle


*
*
*
*

Contact Information


*
*
*

Database Inquiry


If applicable
hours minutes
hours minutes
square inches
hours minutes

Attachments


Resolution Date